datlink technologies products datalink technologies whats new datalink technologies downloads datalink technologies faq datalink sitemap datalink links about datalink technologies contact datalink technologies
 
dl4000 monitor modbus interface

monitor modbus interface dl4000
Interface A-B Power Monitor 3000 to Modbus

The DataLink DL4000-PWM is a custom interface which allows the AB Power Monitor 3000 to connect to a Modbus slave device. The DL4000-PWM does configured reads of specific elements fo the Power Monitor 3000 using DF1 protocol. The returned data is then sent via Modbus RTU protocol to a configured Slave device and Register. Contact us for more information.

Compact and Lightweight
The smallest and lightest freestanding/din rail mounted serial interface for custom networks available.
Easy Configuration
All parameters are menu-driven

Serial Interfacing
RS232C, RS422 and RS485 on two channels, RS232 TX and RX on a third

Increased Throughput
230.4 Kbaud serial on all three channels.

Specifications:

Interfaces
Channel A: Asynchronous; RS232C and RS422/RS485
Channel B: Asynchronous; RS232C and RS422/RS485
Channel C: Asynchronous; RS232

Physical Dimensions
Size: 1.35"H x 4.75"D x 2.92"W
(34.4 mm x 120.7 mm x 74.2 mm)
Weight: 0.56lbs (0.194 kg)
Power: DC: 9-27 VDC; Less than 2 Watts

Installation
Metal enclosure; Freestanding, DIN rail
mounting clips, or #8 bolts

Environment
Operating: +32 F to 122 F (0 C to +50 C)
Storage: -40 F to +185 F (-40 C to +85 C)
Humidity: 5% to 95% non-condensing

Configuration
PC program software menu for communications
parameters

 		 Indicators
1 LED for power-on; 3 bi-color LEDs for
communications activity (one for each channel)

Pushbuttons
Reset and Configure/Diagnostics mode pushbuttons

Error Detection
Channel A: BCC or CRC
Channel B: BCC or CRC
Channel C: BCC or CRC

Communications
Channel A: Asynchronous, 300 baud to 230.4 Kbaud selection
Channel B: Asynchronous, 300 baud to 230.4 Kbaud selection
Channel C: Asynchronous, 300 baud to 230.4 Kbaud selection

Hardware
Z182 Processor; 64 Kbyte programmable flash EPROM;
32 Kbyte RAM; 256 byte EEPROM;

Connectors
CHA: 9-pin RS232, 4-pin RS422, 2-pin RS485
CHB: 9-pin RS232, 4-pin RS422, 2-pin RS485
CHC: 3-pin RS232
Power: 2-pin

back to the top